Open APRS web base
APRS ni rupanya banyak jugak cara nak mainnya try tengok sini http://www.openaprs.net/
sajo laa nak suruh try
sajo laa nak suruh try
How to remote your Yeasu FT897 or FT857
Remote Operation Setup Guide Hopefully this guide will lead you through the required steps. Remote = The computer connected to the rig Local = The laptop (or PC) used to control the rig (Laptop?) ***Note*** This Post assumes you're using an FT-897. If you're using another type of rig, substitute the name of that rig wherever you see FT-897, or 897. *** *** *** 1. Ensure that the firewall is turned off on the remote computer and that your router if used is set to alow access via port 7805 2. Ensure that your rig is connected to the remote computer and can be controlled by direct connection of HRD 3. Enable the HRD server on the remote machine by going to Tools/programs/remote in HRD 4. Close HRD on the remote 5. If you dont have a static IP address then get one from www.no-ip.com and give this ip a name like 'ft897' and install the small no ip program on the remote computer - Its all free like HRD! 6. Install HRD on the
Comments