Igate With Dreambox DM500s

please check at http://aprs.fi/?call=9w2lpq-3 

DSC01475

TNC kena pakai yang jenis support RAW pakat kalau yg jenis support KISS only tak leh pakai so kalau anda nak buat ni kena pastikan anda mempunyai TNC jenis yg dimaksudkan..terima kasih

Comments

Anonymous said…
Kawe ada sebijik DM500S, tapi tak tahu nak guna...lagu mano ni weh?
October 16, 2010 at 10:11 PM
9W2AZV said…
Menarik ni....
May 8, 2013 at 10:21 PM
Post a Comment

Popular posts from this blog

How to remote your Yeasu FT897 or FT857

Remote Operation Setup Guide Hopefully this guide will lead you through the required steps. Remote = The computer connected to the rig Local = The laptop (or PC) used to control the rig (Laptop?) ***Note*** This Post assumes you're using an FT-897. If you're using another type of rig, substitute the name of that rig wherever you see FT-897, or 897. *** *** *** 1. Ensure that the firewall is turned off on the remote computer and that your router if used is set to alow access via port 7805 2. Ensure that your rig is connected to the remote computer and can be controlled by direct connection of HRD 3. Enable the HRD server on the remote machine by going to Tools/programs/remote in HRD 4. Close HRD on the remote 5. If you dont have a static IP address then get one from www.no-ip.com and give this ip a name like 'ft897' and install the small no ip program on the remote computer - Its all free like HRD! 6. Install HRD on the
Read more